In a world of chaos, we have to treasure every piece of pure, innocent, joy we can find.
Okay, that was as deep as I’ll go! Are you looking for a way to display kid’s artwork that doesn’t cost hundreds of dollars or require trigonometry-level math skills?
GREAT. I was too. Here’s how you can make this DIY kid’s art display:
DIY Kid’s Art Display Supplies
- Large Board: I used a scrap piece of hardboard or eucaboard, but another affordable option is this fiberboard
- Paint: I used this chalk paint because I was really into chalk paint at this time, but you could use latex paint from a hardware store or even acrylic (less than $1 each!)
- Paint brush:
- Paint marker: This is the magic part of this! You may want to look at a few sizes of paint markers.
- Clothespins: Or any kind of clip you want
- Frame (optional)
- Stencils (very optional, I did not use these)
Plywood is another alternative for your DIY art display, but it’s going to be much more expensive to buy new. Plus, the hardboard is extremely easy to work with–it doesn’t need sanding or anything like that. I didn’t even use primer when I painted it!
It comes in 4 ft x 4 ft sheets, and you can ask someone at Lowe’s or Home Depot to cut it down.
I honestly stumbled on this material in the cull wood cart at Home Depot. I got it for 70% off and had no idea how I was going to use it for a while! This was the perfect solution.
Step 1: Paint the Board
I simply used one of the large foam brushes to cover the board I had with paint. You’ll most likely need to two do coats of paint, regardless of which type of paint you use.
Step 2: Draw Your Letters
This is the most challenging part of this project–planning out where your letters are going to go. I really didn’t have much of a strategy here, I just used a pencil to sketch it all out. It’s okay if you make mistakes–just paint over them!
When I did this, I had recently taken a one-time hand-lettering class, which helped. You could watch one or two Youtube videos and I’m sure you’d be set.
If you’re totally hopeless at hand lettering (and you’re probably not), you could also go for a more kid-friendly design like this one:
But also…. don’t worry about it being perfect! PUNCH PERFECTIONISM IN THE FACE, girl!
Step 3: Trace with Your Paint Marker
Now it’s time to open up that paint marker, shake it like a polaroid picture, and start “painting” on your letters.
I went with black and white for everything on my sign, but that’s because I actually love colors TOO much and don’t have an eye to put them together well.
You could do rainbow letters and rainbow clips and make this even more fun! The world is your playground. Or oyster. Or whatever the phrase is.
Then your sign is going to look something like this. Paint marker streaks and toys all over the living room and all. 🙂
Step 4: Glue Your Clothespins
Now, before you glue your clothespins on, get out your measuring tape. Measure the width of your board and think about how many clips you want on your board.
You should also remember that you’ll likely be hanging a lot of sheets of paper, which are 8.5 inches x 11 inches. By NO means do you need to have clips that distance apart, but you will probably want them more than an inch or two apart from each other.
Then just grab your glue and put those clothespins on!
Make sure to leave your sign laying horizontally so the glue can fully dry. I got impatient, and a few of my clips fell at first.
Optional Step: Frame Your Kid’s Art Display Board
However, this step is not necessary. I didn’t do it–it’s a great project if you don’t have tools. You need so few supplies to make this beautifully!
Step 5: Hang Your Board Up
It’s fun to see how to look of the board changes with different pieces of kids artwork. 🙂